Application

The cables are designed for use in access or trunk networks, from telephone exchange to subscriber area. The cables are suitable for installation in ducts, direct burial in the ground and also for aerial installation with integral suspension strand.Jelly filled option is for subscriber’s cables installed underground or along the edge of pavement. An armoured option is offered for direct burial installations where additional mechanical or rodent protection is required. A figure-8 self support option is offered for aerial installation.

Normes

• Telcordia (Bellcore) GR-421

 

 

 

Construction

Conductors
Solid annealed bare copper, 0.4/0.5/0.63/0.9mm as per ASTM B-3/class 1 of IEC 60028

Isolation
Foam Skin which is a composite polyethylene insulation made of an inner cellular layer and an outer solid skin as per ASTM D 1248/IEC 60708

Twisted Pairs
Insulated conductors are twisted into pairs with varying lay length to minimize crosstalk

Elément de câblage
Twisted Pairs

Cable Core Assemblée
Cables with up to 400 pairs are composed of 25-pair units or 12/13-pair units; cables with over 400 pairs are composed of 50 or 100-pair units. Any extra pairs form a separate unit. Units are identified by colour coded binders. Standard construction is per GR-421 given in Cable Make Up Diagram

Core Wrapping(optional)
One or more non-hygroscopic polyester tapes are helically or longitudinally laid with an overlap. These tapes furnish thermal, mechanical as well as high dielectric protection between shielding and individual conductors

Moisture Barrier
A layer of bare aluminium tape (0.2mm/8mil) is applied longitudinally with overlap over the cable core to provide 100% electrical shielding coverage and ensures a barrier against water vapor. In cables with more than 200 pairs, the aluminum tape may be corrugated for improved cable flexibility

Remplissage
The cable core interstices are filled with petroleum jelly to avoid longitudinal water penetration within the cable.
The water resistant filling compound is applied to the air space between non-hygroscopic tape and shield, shield and sheath within the cable core

Gaine
Black low density polyethylene as per ASTM D 1248/IEC 60708, being able to withstand exposure to sunlight,
temperature variations, ground chemicals and other environmental contaminants

Ripcord(optional)
Ripcord may be provided for slitting the sheath longitudinally to facilitate its removal

Spare Pairs (optional)
Spare pairs may be incorporated for large pair cables

Continuity Wire (optional)
One tinned copper drain wire may be longitudinally laid to ensure electrical continuity of the screen

Optional Construction

Armoured Cable
Steel wire armour or corrugated steel tape armour applied over an optional inner polyethylene sheath.For steel tape version, the 0.15mm/6mil thick steel tape is coated with a copolymer and applied with an overlap. An outer polyethylene sheath is applied over the armour

Self-Support Cables
A 7-strand galvanized steel strand is used as support wire. Black polyethylene sheath covers both core and support wire in a figure-8 construction

Electrical Properties

Chef d'orchestre Diamètre nominale	mm	0.4	0.5	0.63	0.9
Conductor Gauge Taille	AWG	26	24	22	19
Maximum Moyenne DC Resistance	Ω/km / Ω/mile	140/225	87/140	55/88.6	27.0/43.4
Maximum individuelle DC Resistance	Ω/km / Ω/mile	144.2/232	89.5/144	56.5/91.0	28.0/45.0
Minimum de résistance d'isolement @500V DC	MΩ.km / MΩ.mile	1600/1000	1600/1000	1600/1000	1600/1000
Maximum Moyenne Résistance Unbalance	%	1.5	1.5	1.5	1.5
Maximum de résistance individuelle Unbalance	%	5	5	5	5
Moyenne Mutual Capacitance	nF/km / nF/kft	48.5-54.0 /14.8-16.5	48.5-54.0 /14.8-16.5	48.5-54.0 /14.8-16.5	48.5-54.0 /14.8-16.5
Capacité maximale de placement individuels	nF/km / nF/kft	57/17.4	57/17.4	57/17.4	57/17.4
Capacité maximale individuelle Unbalance pair-à-pair	pF/km / pF/kft	145/44	145/44	145/44	145/44
Capacitance Unbalance RMS pair-à-pair	pF/km / pF/kft	45/13.7	45/13.7	45/13.7	45/13.7
Capacité maximale individuelle Unbalance pair-à-terre	pF/km / pF/kft	2625/800	2625/800	2625/800	2625/800
Maximum Moyenne Capacitance Unbalance pair-à-terre	pF/km / pF/kft	574/175	574/175	574/175	574/175
Chef d'orchestre de résistance de boucle maximale @20°C	Ω/km / Ω/mile	300/482	192/309	114/183.6	60/96.4
Impédance @1KHz	Ω	994	796	660	445
Impédance@100KHz	Ω	147	134	125	122
Impédance @512KHz	Ω	120	118	117	116
Impédance @1MHz	Ω	117	115	114	113
Maximum Moyenne Attenuation @0.8KHz	dB/km / dB/kft	1.64/0.5	1.30/0.39	1.04/0.32	0.74/0.22
Maximum Moyenne Attenuation @1KHz	dB/km / dB/kft	1.68/0.51	1.35/0.41	1.08/0.33	0.76/0.23
Maximum Moyenne Attenuation @3KHz	dB/km / dB/kft	3.18/0.97	2.52/0.77	2.01/0.61	1.42/0.43
Maximum Moyenne Attenuation@150KHz	dB/km / dB/kft	11.4/3.47	8.3/2.53	6.2/1.89	4.4/1.34
Maximum Moyenne Attenuation @772KHz	dB/km / dB/kft	24.3/7.4	19.4/5.9	15.4/4.7	10.8/3.3
Maximum Moyenne Attenuation @1000KHz	dB/km / dB/kft	27.1/8.25	21.4/6.52	17.5/5.33	12.8/3.89
Résistance diélectrique
Chef d'orchestre à l'orchestre (3secs)	V DC	2400	3000	4000	5000
Chef d'orchestre à l'écran(3secs)	V DC	10000	10000	10000	10000

1 2